RF 증폭기
Enter the transistor S-parameters at the design frequency.
설계 주파수에서 트랜지스터의 S 파라미터를 입력하세요.
About this calculator
Enter the transistor S-parameters at the design frequency.
What you need
- System impedance Z₀; the unit box converts between Ω, kΩ, MΩ.
- Frequency; the unit box converts between Hz, kHz, MHz, GHz.
- Source impedance (real) in Ω.
- Source impedance (imaginary) in Ω.
- Load impedance (real) in Ω.
- Load impedance (imaginary) in Ω.
- Source matching network.
- Load matching network.
- S-parameters entered as.
- S11 – magnitude / real.
- S11 – angle / imaginary.
- S12 – magnitude / real.
- S12 – angle / imaginary.
- S21 – magnitude / real.
- S21 – angle / imaginary.
- S22 – magnitude / real.
- S22 – angle / imaginary.
How to read the result
The main result is the rollet stability factor K, shown after you click Calculate; the copy button next to it copies the value. Additional results: |Δ|, stability, maximum available gain.