Dilatazione termica


Linear expansion ΔL = αLΔT.

Dilatazione lineare ΔL = αLΔT. Inserisci α in microdeformazioni per °C (ad esempio 12, non 0,000012). Un risultato negativo indica contrazione.

Inserisci i valori:
°C
°C
10⁻⁶/°C
Risultati:

About this calculator

Linear expansion ΔL = αLΔT. Enter α in microstrain per °C (for example 12, not 0.000012). A negative result means contraction.

What you need

  • Initial length; the unit box converts between m, mm, cm, in, ft.
  • Initial temperature in °C.
  • Final temperature in °C.
  • Linear expansion coefficient in 10⁻⁶/°C (minimum 0).

Formula

Change in length = alpha*L*(Tf-Ti).

Worked example

With initial length 2 m, initial temperature 25 °C, final temperature 25 °C, linear expansion coefficient 10 10⁻⁶/°C, the calculator gives change in length = 0 µm.

How to read the result

The main result is the change in length, shown after you click Calculate; the copy button next to it copies the value.