Тепловое расширение
Linear expansion ΔL = αLΔT.
Линейное расширение ΔL = αLΔT. Вводите α в микродеформации на °C (например 12, а не 0,000012). Отрицательный результат означает сжатие.
About this calculator
Linear expansion ΔL = αLΔT. Enter α in microstrain per °C (for example 12, not 0.000012). A negative result means contraction.
What you need
- Initial length; the unit box converts between m, mm, cm, in, ft.
- Initial temperature in °C.
- Final temperature in °C.
- Linear expansion coefficient in 10⁻⁶/°C (minimum 0).
Formula
Change in length = alpha*L*(Tf-Ti).
Worked example
With initial length 2 m, initial temperature 25 °C, final temperature 25 °C, linear expansion coefficient 10 10⁻⁶/°C, the calculator gives change in length = 0 µm.
How to read the result
The main result is the change in length, shown after you click Calculate; the copy button next to it copies the value.