Injection Molding Cycle Time Calculator


Total cycle time from its phases, theoretical output in parts per hour, and good-parts output after availability and quality yield.

Enter the seconds for each phase (leave non-occurring phases empty), the cavity count, availability and yield.

数値を入力:
%
%
計算結果:
s
parts/hour
parts/hour

How it works

Cycle time = close + fill + pack/hold + cooling + open/eject (adjust for overlapping stages). Parts/hour = 3600 × cavities / cycle time. Good parts/hour = parts/hour × availability × quality yield.

  • Do not double-count operations that overlap - for example screw recovery usually happens during cooling, so it is not extra time.
  • Cooling is usually the largest phase; estimate it with the Cooling Time Calculator.
  • Availability is run time / planned production time; yield is good parts / total parts.

Production arithmetic per the DFMA injection moulding cost-estimating guide.