Tire Contact Patch and Load Calculator


Estimate the contact patch of a tire: load per tire, patch area from load over inflation pressure, and patch length from the tire width. Handy for pavement stress, traction and inflation checks.

Enter the axle load, tire count and inflation pressure.

数値を入力:
計算結果:

How it works

To first order the tire lifts the load with air: patch area = load per tire / inflation pressure. Patch length approximates area / section width. Average contact pressure is close to inflation pressure (slightly higher because of carcass stiffness).

  • Real patches are shorter and wider than area/width; sidewall stiffness adds 5-15% to effective pressure.
  • Lower pressure lengthens the patch (more grip, more heat); higher pressure shrinks it.
  • Use the actual loaded radius data from the tire maker for precise work.

First-order pneumatic estimate. Not valid for run-flat or solid tires.