응력


Average axial normal stress σ = F/A.

평균 축방향 수직 응력 σ = F/A. 명시된 단면에 균일한 하중을 가정하며 구조 설계나 파괴 검토를 수행하지 않습니다. 일반적인 단위가 제공되며 결과는 결과 단위 선택기로 환산할 수 있습니다.

응력

값을 입력하세요:
결과:

About this calculator

Average axial normal stress σ = F/A. Assumes uniform loading of the stated section; this does not perform structural design or a failure check. Common unit choices are provided; results can be converted using the result unit selector.

It has 3 modes: Stress, Force, Area. Pick the tab for the quantity you want.

What you need

  • Axial force; the unit box converts between N, dyne, gf, kgf, lbf, kip.
  • Cross-sectional area; the unit box converts between m², cm², mm², ft², in².

Formula

Normal stress = F/A.

Worked example

With axial force 10 N, cross-sectional area 10 m² in Stress mode, the calculator gives normal stress = 1 Pa.

How to read the result

The main result is the normal stress, shown after you click Calculate; the copy button next to it copies the value.