応力


Average axial normal stress σ = F/A.

平均軸方向垂直応力 σ = F/A。記載の断面に一様な荷重を仮定します。構造設計や破壊チェックは行いません。一般的な単位が用意されています。結果は結果単位セレクターで換算できます。

応力

数値を入力:
計算結果:

About this calculator

Average axial normal stress σ = F/A. Assumes uniform loading of the stated section; this does not perform structural design or a failure check. Common unit choices are provided; results can be converted using the result unit selector.

It has 3 modes: Stress, Force, Area. Pick the tab for the quantity you want.

What you need

  • Axial force; the unit box converts between N, dyne, gf, kgf, lbf, kip.
  • Cross-sectional area; the unit box converts between m², cm², mm², ft², in².

Formula

Normal stress = F/A.

Worked example

With axial force 10 N, cross-sectional area 10 m² in Stress mode, the calculator gives normal stress = 1 Pa.

How to read the result

The main result is the normal stress, shown after you click Calculate; the copy button next to it copies the value.