Módulo de Young
Linear elastic relation σ = Eε.
Relação elástica linear σ = Eε. A deformação é uma fração, não uma percentagem. Aplica-se apenas no regime elástico linear e não é uma verificação de segurança estrutural. Unidades comuns são fornecidas; os resultados podem ser convertidos com o seletor de unidades do resultado.
About this calculator
Linear elastic relation σ = Eε. Strain is a fraction, not percent. This applies only within the linear-elastic range and is not a structural safety check. Common unit choices are provided; results can be converted using the result unit selector.
It has 3 modes: Young's modulus, Stress, Strain. Pick the tab for the quantity you want.
What you need
- Normal stress; the unit box converts between Pa, kPa, MPa, GPa, bar, psi, atm.
- Engineering strain.
Formula
Young's modulus = s/eps.
Worked example
With normal stress 10 Pa, engineering strain 10 in Young's modulus mode, the calculator gives young's modulus = 1 Pa.
How to read the result
The main result is the young's modulus, shown after you click Calculate; the copy button next to it copies the value.