杨氏模量


Linear elastic relation σ = Eε.

线弹性关系 σ = Eε。应变是分数,不是百分比。本式仅适用于线弹性范围,不构成结构安全校核。已提供常用单位选项;结果可通过结果单位选择器换算。

杨氏模量

请输入数值:
结果:

About this calculator

Linear elastic relation σ = Eε. Strain is a fraction, not percent. This applies only within the linear-elastic range and is not a structural safety check. Common unit choices are provided; results can be converted using the result unit selector.

It has 3 modes: Young's modulus, Stress, Strain. Pick the tab for the quantity you want.

What you need

  • Normal stress; the unit box converts between Pa, kPa, MPa, GPa, bar, psi, atm.
  • Engineering strain.

Formula

Young's modulus = s/eps.

Worked example

With normal stress 10 Pa, engineering strain 10 in Young's modulus mode, the calculator gives young's modulus = 1 Pa.

How to read the result

The main result is the young's modulus, shown after you click Calculate; the copy button next to it copies the value.