车床加工计算器
Basic lathe relations.
Basic lathe relations: cutting speed S = pi D N; spindle speed N = S / (pi D); machining time T = L / (f N) for turning (L = length of cut), boring (length bored), drilling and reaming (depth), facing (L = D/2) and knurling (length). Feed f is the tool advance per revolution. Tapping and threading allowances from the original page are not included (empirical constants not verified).
About this calculator
Basic lathe relations: cutting speed S = pi D N; spindle speed N = S / (pi D); machining time T = L / (f N) for turning (L = length of cut), boring (length bored), drilling and reaming (depth), facing (L = D/2) and knurling (length). Feed f is the tool advance per revolution. Tapping and threading allowances from the original page are not included (empirical constants not verified).
It has 3 modes: Cutting speed, Spindle speed, Machining time (turning, boring, drilling, facing, knurling, reaming). Pick the tab for the quantity you want.
What you need
- Diameter of job (D); the unit box converts between mm, cm, m, in.
- Revolutions of job per minute (N); the unit box converts between rev/min.
Formula
Cutting speed (S) = pi*D*N.
Worked example
With diameter of job (D) 2 cm, revolutions of job per minute (N) 10 rev/min in Cutting speed mode, the calculator gives cutting speed (S) = 0.628319 m/min.
How to read the result
The main result is the cutting speed (S), shown after you click Calculate; the copy button next to it copies the value.