旋盤加工計算機


Basic lathe relations.

Basic lathe relations: cutting speed S = pi D N; spindle speed N = S / (pi D); machining time T = L / (f N) for turning (L = length of cut), boring (length bored), drilling and reaming (depth), facing (L = D/2) and knurling (length). Feed f is the tool advance per revolution. Tapping and threading allowances from the original page are not included (empirical constants not verified).

Cutting speed

数値を入力:
計算結果:

About this calculator

Basic lathe relations: cutting speed S = pi D N; spindle speed N = S / (pi D); machining time T = L / (f N) for turning (L = length of cut), boring (length bored), drilling and reaming (depth), facing (L = D/2) and knurling (length). Feed f is the tool advance per revolution. Tapping and threading allowances from the original page are not included (empirical constants not verified).

It has 3 modes: Cutting speed, Spindle speed, Machining time (turning, boring, drilling, facing, knurling, reaming). Pick the tab for the quantity you want.

What you need

  • Diameter of job (D); the unit box converts between mm, cm, m, in.
  • Revolutions of job per minute (N); the unit box converts between rev/min.

Formula

Cutting speed (S) = pi*D*N.

Worked example

With diameter of job (D) 2 cm, revolutions of job per minute (N) 10 rev/min in Cutting speed mode, the calculator gives cutting speed (S) = 0.628319 m/min.

How to read the result

The main result is the cutting speed (S), shown after you click Calculate; the copy button next to it copies the value.