Pump Total Dynamic Head (TDH) Calculator
Add up every head component the pump must overcome: static lift, suction and discharge pressure difference, velocity head change and friction losses in the suction and discharge piping (Darcy-Weisbach).
Enter the duty point and both pipe runs. Use 0 pressure for open tanks.
How it works
TDH = static lift + (p(2)−p(1))/ρg + (v(2)²−v(1)²)/2g + h(f,suction) + h(f,discharge). Pipe friction uses Darcy-Weisbach: h(f) = (fL/D + ΣK)·v²/2g with your friction factor and fitting K values.
- Suction static head is negative if the pump sits above the suction level (suction lift); enter the lift as the signed difference of levels.
- Typical water velocities: 1-2 m/s suction, 2-3 m/s discharge. A friction factor of 0.02 suits clean steel pipe; use the Darcy-Weisbach calculator here for a computed f.
- For viscous fluids friction rises sharply; verify f at the actual Reynolds number.
Use TDH with the flow rate to read the pump curve. Add NPSH checks for suction lift duties (see the NPSH calculator on this site).