Extrusion Throughput Calculator


Mass output of an extrusion line from the product cross-section, line speed and resin density - or the line speed needed to hit a target output.

Tab 1 gives mass output from line speed; tab 2 gives the line speed for a target output.

Output from line speed

Introduzca los valores:

Only used when the material list is set to Custom. Check your resin datasheet.

Resultados:

How it works

Mass continuity: output = density × cross-sectional area × line speed. Rearranged, line speed = output / (density × area). For a hollow pipe, use the annular area - the Plastic Pipe Weight Calculator computes it from OD and wall.

  • Best for a known, steady cross-section and line speed. Multi-layer products: calculate each layer separately and add the outputs.
  • Real output can differ because of die swell, drawdown, voids and density change - check against the weighed line output.
  • The extruder must also be able to plasticise the required throughput, and haul-off and cooling must support the line speed.

Mass-continuity relationship; validate against measured line output.