Injection Molding Clamping Force Calculator


Estimate the clamping force an injection molding machine must supply: total projected area of the cavities and runner on the parting plane, times the cavity pressure, plus a safety factor for the required machine tonnage.

Enter the total projected area (all cavities plus runner), the cavity pressure and a safety factor.

Introduzca los valores:

1.1-1.5 is typical; use your molder's guidance.

Resultados:

How it works

Clamping force F = pcav × Aproj,total. With area in cm² and cavity pressure in bar this is F(kN) = A(cm²) × p(bar) / 100. The required machine rating is F × safety factor.

  • Sum the projected areas of all cavities plus the pressure-exposed runner and sprue area on the parting plane.
  • Use the cavity pressure, not the machine's hydraulic or injection pressure. Typical cavity pressures run from roughly 200 bar (easy-flow materials, thick parts) to 800 bar or more (thin walls, high-viscosity resins) - ask your material supplier or mould-flow study for a value.
  • The safety factor covers mould and machine stiffness, process window and permitted flash. Values of 1.1 to 1.5 are common.

Estimate only. Verify the final machine selection against the mould design and machine manual. Formula convention per LANXESS processing data for injection moulders and KEYENCE injection-moulding formulas.