Injection Molding Cooling Time Calculator


Theoretical cooling time for a plate-like part, from part thickness, thermal diffusivity of the resin and the melt, mould-wall and ejection temperatures. A second tab computes thermal diffusivity from conductivity, density and specific heat.

Enter wall thickness, the three temperatures and the resin's thermal diffusivity (or compute it in the second tab).

Cooling time

Introduzca los valores:
°C
°C
°C
mm²/s

Only used when the material list is set to Custom. Typical range 0.07-0.20 mm²/s.

Resultados:

How it works

Flat-plate approximation: tc = (s² / π²α) × ln[(4/π) × (Tmelt − Tmould) / (Teject − Tmould)], with s = wall thickness and α = thermal diffusivity. Thermal diffusivity α = k / (ρ × cp).

  • Thickness has a squared effect: doubling the wall roughly quadruples the cooling time.
  • Ejection temperature must lie between melt and mould-wall temperature.
  • Use the resin supplier's thermal properties. Crystallisation, cooling-channel layout, hot spots and mould-temperature cycling change the real cooling time.

Estimate only (one-dimensional conduction model), not a process guarantee - validate on the machine. Model per BASF, Estimating Cooling Times in Injection Molding.