Deformación unitaria


Engineering strain ε = ΔL/L0.

Deformación unitaria ε = ΔL/L0. Es adimensional, no porcentaje: 0,01 significa 1 %. Positivo es alargamiento y negativo es acortamiento. Se ofrecen unidades habituales; los resultados pueden convertirse con el selector de unidades del resultado.

Deformación unitaria

Introduzca los valores:
Resultados:

About this calculator

Engineering strain ε = ΔL/L0. It is dimensionless, not percent: 0.01 means 1%. Positive is extension and negative is compression. Common unit choices are provided; results can be converted using the result unit selector.

It has 3 modes: Strain, Change in length, Original length. Pick the tab for the quantity you want.

What you need

  • Signed change in length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
  • Original length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.

Formula

Engineering strain = dL/L.

Worked example

With signed change in length 2 m, original length 2 m in Strain mode, the calculator gives engineering strain = 1.

How to read the result

The main result is the engineering strain, shown after you click Calculate; the copy button next to it copies the value.