应变


Engineering strain ε = ΔL/L0.

工程应变 ε = ΔL/L0。它是无量纲量,不是百分比:0.01 表示 1%。正值为拉伸,负值为压缩。已提供常用单位选项;结果可通过结果单位选择器换算。

应变

请输入数值:
结果:

About this calculator

Engineering strain ε = ΔL/L0. It is dimensionless, not percent: 0.01 means 1%. Positive is extension and negative is compression. Common unit choices are provided; results can be converted using the result unit selector.

It has 3 modes: Strain, Change in length, Original length. Pick the tab for the quantity you want.

What you need

  • Signed change in length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
  • Original length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.

Formula

Engineering strain = dL/L.

Worked example

With signed change in length 2 m, original length 2 m in Strain mode, the calculator gives engineering strain = 1.

How to read the result

The main result is the engineering strain, shown after you click Calculate; the copy button next to it copies the value.