Töjning
Engineering strain ε = ΔL/L0.
Teknisk töjning ε = ΔL/L0. Den är dimensionslös, inte procent: 0,01 betyder 1 %. Positiv är förlängning och negativ är tryckning. Vanliga enheter finns; resultat kan räknas om med resultatenhetsväljaren.
About this calculator
Engineering strain ε = ΔL/L0. It is dimensionless, not percent: 0.01 means 1%. Positive is extension and negative is compression. Common unit choices are provided; results can be converted using the result unit selector.
It has 3 modes: Strain, Change in length, Original length. Pick the tab for the quantity you want.
What you need
- Signed change in length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
- Original length; the unit box converts between m, cm, mm, in, ft, yd, km, mi.
Formula
Engineering strain = dL/L.
Worked example
With signed change in length 2 m, original length 2 m in Strain mode, the calculator gives engineering strain = 1.
How to read the result
The main result is the engineering strain, shown after you click Calculate; the copy button next to it copies the value.