Chain Drive Selection Calculator


Size a roller-chain drive for preliminary selection: design power with service factor, chain speed and working pull, driven sprocket teeth, chain length in links and the small-sprocket wrap angle.

Enter power, speeds and the chain you intend to use.

Saisissez vos valeurs :
Résultats :

How it works

Design power P(d) = P × K(s). Chain speed v = z(1)·n(1)·p / 60000 (m/s, p in mm) and working pull F = P(d)·1000 / v. Chain length in pitches L(p) = 2C(p) + (z(1)+z(2))/2 + ((z(2)−z(1))/2π)²/C(p); round up to the next even number of pitches to avoid an offset link. Wrap angle = 180 − 57.3(z(2)−z(1))/C(p) and should stay at 120° or more.

  • Compare the design power with the manufacturer's kW rating table for the chosen chain at your small-sprocket speed; use multiple strands if one is not enough (x1.7 for 2 strands, x2.5 for 3).
  • Keep the speed ratio to 7:1 or less and centre distance at 30-50 pitches.
  • Chain working pull must stay well below the chain's minimum tensile strength (fatigue, not ultimate, normally governs).

Preliminary selection. Final choice needs the full rating table, lubrication type and life calculation from the chain maker's catalogue.