레벨 5


30 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.

값을 입력하세요:
결과:
%

Answers and sources

Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.

Question 1: answer and source

Direct expense includes

Answer: material costs

Direct expenses are charged to the product: material, direct labour and direct expenses; key unchanged.

Question 2: answer and source

Cast iron contains one of the following % of carbon

Answer: 2 to 4 %

Cast irons contain 2-4% carbon; key unchanged.

Question 3: answer and source

Rack and pinion arrangement is used for

Answer: rotary to linear motion

A rack and pinion converts rotary motion to linear motion (and vice versa); key unchanged.

Question 4: answer and source

Tungsten in HSS imparts

Answer: red hardness

Tungsten gives high speed steel its red (hot) hardness; key unchanged. Fixed misprint 'is HSS'.

Question 5: answer and source

An error of 5% occurred during the measurement of the dia of a cylindrical part. The likely error in the calculated weight of the part is

Answer: 10 %

Weight is proportional to d^2, so the error doubles: 2 x 5% = 10%; key unchanged. Fixed misprint 'ducing'.

Question 6: answer and source

The operation chart indicates

Answer: sequence of operation

An operation (outline process) chart records the sequence of operations and inspections; legacy keyed 'times for each operation'.

Question 7: answer and source

Standard data used in work study is a

Answer: catalogue of elemental time standard

Standard data is a bank of elemental time standards built from previous studies; key unchanged.

Question 8: answer and source

Two stroke IC engines are commonly used in 2 wheelers because the

Answer: power to weight ratio is high

Two-strokes fire every revolution, giving high power-to-weight; key unchanged. Fixed misprint 'cnoise'.

Question 9: answer and source

High carbon steel has a carbon content of

Answer: 0.8 to 2 %

High carbon steels run about 0.8-1.5% C (0.8-2% is the closest option); key unchanged.

Question 10: answer and source

The equipment used for transporting material horizontally as well as vertically which saves labour cost is

Answer: conveyors

Conveyors move material continuously in any plane; key unchanged.

Question 11: answer and source

For large power production, it is economical to set up

Answer: hydro-electric plants

Hydro-electric plants have the lowest running cost for large power; key unchanged.

Question 12: answer and source

During tensile testing on a specimen cup and cone formation is observed with

Answer: mild steel

Cup-and-cone fracture is characteristic of ductile materials like mild steel; key unchanged.

Question 13: answer and source

When water at atmospheric pressure is heated from 40 deg to 80 deg, the heat absorbed is

Answer: sensible heat

Temperature rise without phase change absorbs sensible heat; key unchanged.

Question 14: answer and source

For comfort air conditioning the conditions maintained are

Answer: 25 deg dbt to 60 % RH

Comfort conditions are about 25 deg C DBT and 60% RH; key unchanged.

Question 15: answer and source

For transmitting power without slip one of the following drives is used

Answer: chain drives

Chain drives are positive drives with no slip; key unchanged.

Question 16: answer and source

For chain drives the small sprockets should have a minimum number of teeth of

Answer: 17

The pinion sprocket should have at least 17 teeth to limit chordal action; key unchanged.

Question 17: answer and source

The angular speed of watt governor, when its height is 98 mm is equal to

Answer: 10 rad/s

h = g/w^2 gives w = sqrt(9.8/0.098) = 10 rad/s; key unchanged.

Question 18: answer and source

The area under pressure volume curve of any thermodynamic process represents

Answer: work done

The area under the p-V curve is the boundary work done; legacy keyed heat.

Question 19: answer and source

First law of the thermodynamics deals with conservation of

Answer: energy

The first law is conservation of energy; key unchanged. Fixed misprint 'conversation'.

Question 20: answer and source

The number of valves in a two stroke engine is

Answer: 0

A two-stroke uses ports instead of valves; key unchanged.

Question 21: answer and source

A perfect gas at 27 C is heated at constant pressure as to trible its volume the temperature of the gas will be

Answer: 627 deg C

At constant pressure V proportional to T (absolute): T2 = 3 x 300 = 900 K = 627 deg C; legacy keyed 81 deg C.

Question 22: answer and source

In a petrol engine the theoretical ratio of air to fuel is approximately

Answer: 15:1

Stoichiometric air-fuel ratio for petrol is about 14.7:1, i.e. 15:1; legacy keyed 5:1. Fixed misprint 'pertrol'.

Question 23: answer and source

Chuck used on turret lathe is

Answer: Collet chuck

Turret lathes run bar stock held in collet chucks; legacy keyed 'three jaw independent' (a mismatched name - three jaw chucks are self-centering). Option spellings fixed ('chunk'/'Collect').

Question 24: answer and source

Bore and stroke of a double acting steam engine cylinder are 30 cms and 50 cms respectively. If the IHP on crank end is 1% less than IHP on cover end, the diameter of piston rod is

Answer: 3 cm

The rod area must be 1% of the piston area: a = 0.01 x (pi/4) x 900 = 7.07 cm^2, so d = sqrt(4a/pi) = 3 cm; key unchanged.

Question 25: answer and source

Kerosene is used as coolant, while machining

Answer: aluminium

Kerosene (paraffin) is the classic cutting fluid for aluminium (cast iron is usually machined dry); legacy keyed cast iron.

Question 26: answer and source

ABC analysis deals with

Answer: Controlling inventory costs

ABC analysis classifies inventory by value to control inventory costs; key unchanged.

Question 27: answer and source

The basic tool of work study is

Answer: stop watch

The stop watch is the basic time-study instrument; key unchanged.

Question 28: answer and source

Routing prescribes

Answer: The flow of materials in the plant

Routing fixes the path/sequence of work through the plant; key unchanged. Fixed misprint 'point'.

Question 29: answer and source

Bin cards are used in

Answer: Stores

Bin cards record stock receipts and issues in stores; key unchanged.

Question 30: answer and source

Quick return motion is used in a

Answer: shaper

The shaper's quick return cuts the idle stroke time; key unchanged.

Change log: 17 November 2026

Original question numbers and review decisions
  • Original Q1: verified as keyed. Direct expenses are charged to the product: material, direct labour and direct expenses; key unchanged.
  • Original Q3: verified as keyed. Cast irons contain 2-4% carbon; key unchanged.
  • Original Q4: verified as keyed. A rack and pinion converts rotary motion to linear motion (and vice versa); key unchanged.
  • Original Q5: verified as keyed. Tungsten gives high speed steel its red (hot) hardness; key unchanged. Fixed misprint 'is HSS'.
  • Original Q6: verified as keyed. Weight is proportional to d^2, so the error doubles: 2 x 5% = 10%; key unchanged. Fixed misprint 'ducing'.
  • Original Q7: verified as keyed. An operation (outline process) chart records the sequence of operations and inspections; legacy keyed 'times for each operation'.
  • Original Q8: verified as keyed. Standard data is a bank of elemental time standards built from previous studies; key unchanged.
  • Original Q9: verified as keyed. Two-strokes fire every revolution, giving high power-to-weight; key unchanged. Fixed misprint 'cnoise'.
  • Original Q10: verified as keyed. High carbon steels run about 0.8-1.5% C (0.8-2% is the closest option); key unchanged.
  • Original Q11: verified as keyed. Conveyors move material continuously in any plane; key unchanged.
  • Original Q12: verified as keyed. Hydro-electric plants have the lowest running cost for large power; key unchanged.
  • Original Q13: verified as keyed. Cup-and-cone fracture is characteristic of ductile materials like mild steel; key unchanged.
  • Original Q14: verified as keyed. Temperature rise without phase change absorbs sensible heat; key unchanged.
  • Original Q15: verified as keyed. Comfort conditions are about 25 deg C DBT and 60% RH; key unchanged.
  • Original Q16: verified as keyed. Chain drives are positive drives with no slip; key unchanged.
  • Original Q17: verified as keyed. The pinion sprocket should have at least 17 teeth to limit chordal action; key unchanged.
  • Original Q18: verified as keyed. h = g/w^2 gives w = sqrt(9.8/0.098) = 10 rad/s; key unchanged.
  • Original Q19: verified as keyed. The area under the p-V curve is the boundary work done; legacy keyed heat.
  • Original Q20: verified as keyed. The first law is conservation of energy; key unchanged. Fixed misprint 'conversation'.
  • Original Q21: verified as keyed. A two-stroke uses ports instead of valves; key unchanged.
  • Original Q22: verified as keyed. At constant pressure V proportional to T (absolute): T2 = 3 x 300 = 900 K = 627 deg C; legacy keyed 81 deg C.
  • Original Q23: verified as keyed. Stoichiometric air-fuel ratio for petrol is about 14.7:1, i.e. 15:1; legacy keyed 5:1. Fixed misprint 'pertrol'.
  • Original Q24: verified as keyed. Turret lathes run bar stock held in collet chucks; legacy keyed 'three jaw independent' (a mismatched name - three jaw chucks are self-centering). Option spellings fixed ('chunk'/'Collect').
  • Original Q25: verified as keyed. The rod area must be 1% of the piston area: a = 0.01 x (pi/4) x 900 = 7.07 cm^2, so d = sqrt(4a/pi) = 3 cm; key unchanged.
  • Original Q26: verified as keyed. Kerosene (paraffin) is the classic cutting fluid for aluminium (cast iron is usually machined dry); legacy keyed cast iron.
  • Original Q27: verified as keyed. ABC analysis classifies inventory by value to control inventory costs; key unchanged.
  • Original Q28: verified as keyed. The stop watch is the basic time-study instrument; key unchanged.
  • Original Q29: verified as keyed. Routing fixes the path/sequence of work through the plant; key unchanged. Fixed misprint 'point'.
  • Original Q30: verified as keyed. Bin cards record stock receipts and issues in stores; key unchanged.
  • Original Q31: verified as keyed. The shaper's quick return cuts the idle stroke time; key unchanged.
  • Original Q2: The correct production-control sequence is Routing -> Scheduling -> Dispatching, i.e. (ii),(iii),(i), which is not among the four legacy options; the keyed (iii),(ii),(i) is wrong. Dropped as unfixable.