Stufe 5
30 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.
Answers and sources
Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.
Question 1: answer and source
Direct expense includes
Answer: material costs
Direct expenses are charged to the product: material, direct labour and direct expenses; key unchanged.
Question 2: answer and source
Cast iron contains one of the following % of carbon
Answer: 2 to 4 %
Cast irons contain 2-4% carbon; key unchanged.
Question 3: answer and source
Rack and pinion arrangement is used for
Answer: rotary to linear motion
A rack and pinion converts rotary motion to linear motion (and vice versa); key unchanged.
Question 4: answer and source
Tungsten in HSS imparts
Answer: red hardness
Tungsten gives high speed steel its red (hot) hardness; key unchanged. Fixed misprint 'is HSS'.
Question 5: answer and source
An error of 5% occurred during the measurement of the dia of a cylindrical part. The likely error in the calculated weight of the part is
Answer: 10 %
Weight is proportional to d^2, so the error doubles: 2 x 5% = 10%; key unchanged. Fixed misprint 'ducing'.
Question 6: answer and source
The operation chart indicates
Answer: sequence of operation
An operation (outline process) chart records the sequence of operations and inspections; legacy keyed 'times for each operation'.
Question 7: answer and source
Standard data used in work study is a
Answer: catalogue of elemental time standard
Standard data is a bank of elemental time standards built from previous studies; key unchanged.
Question 8: answer and source
Two stroke IC engines are commonly used in 2 wheelers because the
Answer: power to weight ratio is high
Two-strokes fire every revolution, giving high power-to-weight; key unchanged. Fixed misprint 'cnoise'.
Question 9: answer and source
High carbon steel has a carbon content of
Answer: 0.8 to 2 %
High carbon steels run about 0.8-1.5% C (0.8-2% is the closest option); key unchanged.
Question 10: answer and source
The equipment used for transporting material horizontally as well as vertically which saves labour cost is
Answer: conveyors
Conveyors move material continuously in any plane; key unchanged.
Question 11: answer and source
For large power production, it is economical to set up
Answer: hydro-electric plants
Hydro-electric plants have the lowest running cost for large power; key unchanged.
Question 12: answer and source
During tensile testing on a specimen cup and cone formation is observed with
Answer: mild steel
Cup-and-cone fracture is characteristic of ductile materials like mild steel; key unchanged.
Question 13: answer and source
When water at atmospheric pressure is heated from 40 deg to 80 deg, the heat absorbed is
Answer: sensible heat
Temperature rise without phase change absorbs sensible heat; key unchanged.
Question 14: answer and source
For comfort air conditioning the conditions maintained are
Answer: 25 deg dbt to 60 % RH
Comfort conditions are about 25 deg C DBT and 60% RH; key unchanged.
Question 15: answer and source
For transmitting power without slip one of the following drives is used
Answer: chain drives
Chain drives are positive drives with no slip; key unchanged.
Question 16: answer and source
For chain drives the small sprockets should have a minimum number of teeth of
Answer: 17
The pinion sprocket should have at least 17 teeth to limit chordal action; key unchanged.
Question 17: answer and source
The angular speed of watt governor, when its height is 98 mm is equal to
Answer: 10 rad/s
h = g/w^2 gives w = sqrt(9.8/0.098) = 10 rad/s; key unchanged.
Question 18: answer and source
The area under pressure volume curve of any thermodynamic process represents
Answer: work done
The area under the p-V curve is the boundary work done; legacy keyed heat.
Question 19: answer and source
First law of the thermodynamics deals with conservation of
Answer: energy
The first law is conservation of energy; key unchanged. Fixed misprint 'conversation'.
Question 20: answer and source
The number of valves in a two stroke engine is
Answer: 0
A two-stroke uses ports instead of valves; key unchanged.
Question 21: answer and source
A perfect gas at 27 C is heated at constant pressure as to trible its volume the temperature of the gas will be
Answer: 627 deg C
At constant pressure V proportional to T (absolute): T2 = 3 x 300 = 900 K = 627 deg C; legacy keyed 81 deg C.
Question 22: answer and source
In a petrol engine the theoretical ratio of air to fuel is approximately
Answer: 15:1
Stoichiometric air-fuel ratio for petrol is about 14.7:1, i.e. 15:1; legacy keyed 5:1. Fixed misprint 'pertrol'.
Question 23: answer and source
Chuck used on turret lathe is
Answer: Collet chuck
Turret lathes run bar stock held in collet chucks; legacy keyed 'three jaw independent' (a mismatched name - three jaw chucks are self-centering). Option spellings fixed ('chunk'/'Collect').
Question 24: answer and source
Bore and stroke of a double acting steam engine cylinder are 30 cms and 50 cms respectively. If the IHP on crank end is 1% less than IHP on cover end, the diameter of piston rod is
Answer: 3 cm
The rod area must be 1% of the piston area: a = 0.01 x (pi/4) x 900 = 7.07 cm^2, so d = sqrt(4a/pi) = 3 cm; key unchanged.
Question 25: answer and source
Kerosene is used as coolant, while machining
Answer: aluminium
Kerosene (paraffin) is the classic cutting fluid for aluminium (cast iron is usually machined dry); legacy keyed cast iron.
Question 26: answer and source
ABC analysis deals with
Answer: Controlling inventory costs
ABC analysis classifies inventory by value to control inventory costs; key unchanged.
Question 27: answer and source
The basic tool of work study is
Answer: stop watch
The stop watch is the basic time-study instrument; key unchanged.
Question 28: answer and source
Routing prescribes
Answer: The flow of materials in the plant
Routing fixes the path/sequence of work through the plant; key unchanged. Fixed misprint 'point'.
Question 29: answer and source
Bin cards are used in
Answer: Stores
Bin cards record stock receipts and issues in stores; key unchanged.
Question 30: answer and source
Quick return motion is used in a
Answer: shaper
The shaper's quick return cuts the idle stroke time; key unchanged.
Change log: 17 November 2026
Original question numbers and review decisions
- Original Q1: verified as keyed. Direct expenses are charged to the product: material, direct labour and direct expenses; key unchanged.
- Original Q3: verified as keyed. Cast irons contain 2-4% carbon; key unchanged.
- Original Q4: verified as keyed. A rack and pinion converts rotary motion to linear motion (and vice versa); key unchanged.
- Original Q5: verified as keyed. Tungsten gives high speed steel its red (hot) hardness; key unchanged. Fixed misprint 'is HSS'.
- Original Q6: verified as keyed. Weight is proportional to d^2, so the error doubles: 2 x 5% = 10%; key unchanged. Fixed misprint 'ducing'.
- Original Q7: verified as keyed. An operation (outline process) chart records the sequence of operations and inspections; legacy keyed 'times for each operation'.
- Original Q8: verified as keyed. Standard data is a bank of elemental time standards built from previous studies; key unchanged.
- Original Q9: verified as keyed. Two-strokes fire every revolution, giving high power-to-weight; key unchanged. Fixed misprint 'cnoise'.
- Original Q10: verified as keyed. High carbon steels run about 0.8-1.5% C (0.8-2% is the closest option); key unchanged.
- Original Q11: verified as keyed. Conveyors move material continuously in any plane; key unchanged.
- Original Q12: verified as keyed. Hydro-electric plants have the lowest running cost for large power; key unchanged.
- Original Q13: verified as keyed. Cup-and-cone fracture is characteristic of ductile materials like mild steel; key unchanged.
- Original Q14: verified as keyed. Temperature rise without phase change absorbs sensible heat; key unchanged.
- Original Q15: verified as keyed. Comfort conditions are about 25 deg C DBT and 60% RH; key unchanged.
- Original Q16: verified as keyed. Chain drives are positive drives with no slip; key unchanged.
- Original Q17: verified as keyed. The pinion sprocket should have at least 17 teeth to limit chordal action; key unchanged.
- Original Q18: verified as keyed. h = g/w^2 gives w = sqrt(9.8/0.098) = 10 rad/s; key unchanged.
- Original Q19: verified as keyed. The area under the p-V curve is the boundary work done; legacy keyed heat.
- Original Q20: verified as keyed. The first law is conservation of energy; key unchanged. Fixed misprint 'conversation'.
- Original Q21: verified as keyed. A two-stroke uses ports instead of valves; key unchanged.
- Original Q22: verified as keyed. At constant pressure V proportional to T (absolute): T2 = 3 x 300 = 900 K = 627 deg C; legacy keyed 81 deg C.
- Original Q23: verified as keyed. Stoichiometric air-fuel ratio for petrol is about 14.7:1, i.e. 15:1; legacy keyed 5:1. Fixed misprint 'pertrol'.
- Original Q24: verified as keyed. Turret lathes run bar stock held in collet chucks; legacy keyed 'three jaw independent' (a mismatched name - three jaw chucks are self-centering). Option spellings fixed ('chunk'/'Collect').
- Original Q25: verified as keyed. The rod area must be 1% of the piston area: a = 0.01 x (pi/4) x 900 = 7.07 cm^2, so d = sqrt(4a/pi) = 3 cm; key unchanged.
- Original Q26: verified as keyed. Kerosene (paraffin) is the classic cutting fluid for aluminium (cast iron is usually machined dry); legacy keyed cast iron.
- Original Q27: verified as keyed. ABC analysis classifies inventory by value to control inventory costs; key unchanged.
- Original Q28: verified as keyed. The stop watch is the basic time-study instrument; key unchanged.
- Original Q29: verified as keyed. Routing fixes the path/sequence of work through the plant; key unchanged. Fixed misprint 'point'.
- Original Q30: verified as keyed. Bin cards record stock receipts and issues in stores; key unchanged.
- Original Q31: verified as keyed. The shaper's quick return cuts the idle stroke time; key unchanged.
- Original Q2: The correct production-control sequence is Routing -> Scheduling -> Dispatching, i.e. (ii),(iii),(i), which is not among the four legacy options; the keyed (iii),(ii),(i) is wrong. Dropped as unfixable.