Nivå 6
31 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.
Answers and sources
Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.
Question 1: answer and source
The bed of a machine tool is normally made of
Answer: C.I.
Cast iron's damping and castability make it the standard bed material; key unchanged.
Question 2: answer and source
For transmitting power between two shafts which are at right angles but non-intersecting, the gearing used is
Answer: worm and worm wheel
Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.
Question 3: answer and source
In a lifting machine, a load of 50 KN is moved through a distance of 0.1 m by an effort of 10 KN which moves through a distance of 1 m, the efficiency of the machine is
Answer: 50%
Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.
Question 4: answer and source
The spindles of bench vices are usually provided with
Answer: square threads
Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).
Question 5: answer and source
Complementary shear stresses equal to 200 KN/m^2 are acting on the side of a square 1m*1m, the stress on the diagonal is
Answer: 200 KN/m^2, tensile
Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.
Question 6: answer and source
First law of thermodynamics involves the concept of
Answer: internal energy
The first law introduces internal energy (dU = dQ - dW); key unchanged.
Question 7: answer and source
The kinetic energy of a body of a mass 2kg, when it falls in air from rest through a height of 5 m is
Answer: 98.1 J
KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.
Question 8: answer and source
Indicated thermal efficiency of an engine is
Answer: Brake thermal efficiency/Mechanical efficiency
Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.
Question 9: answer and source
The approximate air fuel ratio in a diesel engine under rated conditions is
Answer: 20 to 1
Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.
Question 10: answer and source
A 4 cylinder 4 stroke diesel engine has 3000 power strokes per minute; its speed in RPM is
Answer: 1500
Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.
Question 11: answer and source
One of the following type of pumps is used in a diesel engine
Answer: reciprocating pump
The fuel injection pump is a reciprocating (plunger) pump; key unchanged.
Question 12: answer and source
In a six cylinder 4 stroke petrol engine running at 2000 RPM, the cam shaft runs at
Answer: 2000 RPM
The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.
Question 13: answer and source
The inlet valve in a 4 stroke IC engine opens
Answer: before TDC
Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.
Question 14: answer and source
The gudgeon pin connects the
Answer: piston and the connecting rod
The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.
Question 15: answer and source
The cost of lubricating oils in a machine shop may be classified as
Answer: factory overhead cost
Lubricants are indirect materials, part of factory overhead; key unchanged.
Question 16: answer and source
The thermo dynamic cycle used in a petrol engine is the
Answer: constant volume cycle
Petrol engines work on the Otto (constant volume) cycle; key unchanged.
Question 17: answer and source
A 4 stroke 2 cylinder diesel engine has an IMEP of 4 bar and a mechanical efficiency of 80 per cent, the brake mean effective pressure is
Answer: 3.2 bar
BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.
Question 18: answer and source
In an impulse turbine the velocity of steam remains constant in the
Answer: moving blades
In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.
Question 19: answer and source
Parson's turbine is an example of a
Answer: reaction turbine
Parsons' turbine is the classic reaction steam turbine; key unchanged.
Question 20: answer and source
An example of a water tube boiler is a
Answer: Babcock-Wilcox boiler
Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.
Question 21: answer and source
Which one of the following is a boiler mounting?
Answer: fusible plug
The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.
Question 22: answer and source
In our state a super thermal power station is located at
Answer: Ramagundam
Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.
Question 23: answer and source
Super heated steam at 20 bar enters a nozzle, for maximum discharge the throat pressure should be
Answer: 10.92 bar
With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.
Question 24: answer and source
For the purpose of comparison, the steam generating capacity of a boiler is generally expressed in terms of
Answer: equivalent evaporation
Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.
Question 25: answer and source
One of the following methods is adopted for governing of steam turbines in a power plant
Answer: throttle governing
Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.
Question 26: answer and source
An aircraft gas turbine operates on
Answer: Brayton cycle
Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.
Question 27: answer and source
The output of a gas turbine is 3000 KW and its efficiency is 20 percent, the heat supplied is
Answer: 15 MW
Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.
Question 28: answer and source
Which one of the following is not used as a refrigerant?
Answer: carbon monoxide
Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.
Question 29: answer and source
The refrigerant used in the domestic refrigerator is
Answer: Freon
Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.
Question 30: answer and source
In industry of developed nations the type of production most often occuring is
Answer: Batch production
Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.
Question 31: answer and source
The operation which can not be performed on a lathe machine is
Answer: slotting
Slotting needs a slotter/shaper; key unchanged.
Change log: 17 November 2026
Original question numbers and review decisions
- Original Q1: verified as keyed. Cast iron's damping and castability make it the standard bed material; key unchanged.
- Original Q2: verified as keyed. Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.
- Original Q3: corrected. Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.
- Original Q4: verified as keyed. Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).
- Original Q5: verified as keyed. Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.
- Original Q6: verified as keyed. The first law introduces internal energy (dU = dQ - dW); key unchanged.
- Original Q7: verified as keyed. KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.
- Original Q8: verified as keyed. Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.
- Original Q9: verified as keyed. Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.
- Original Q10: verified as keyed. Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.
- Original Q11: verified as keyed. The fuel injection pump is a reciprocating (plunger) pump; key unchanged.
- Original Q12: verified as keyed. The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.
- Original Q13: verified as keyed. Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.
- Original Q14: verified as keyed. The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.
- Original Q15: verified as keyed. Lubricants are indirect materials, part of factory overhead; key unchanged.
- Original Q16: verified as keyed. Petrol engines work on the Otto (constant volume) cycle; key unchanged.
- Original Q17: verified as keyed. BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.
- Original Q18: verified as keyed. In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.
- Original Q19: verified as keyed. Parsons' turbine is the classic reaction steam turbine; key unchanged.
- Original Q20: verified as keyed. Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.
- Original Q21: verified as keyed. The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.
- Original Q22: verified as keyed. Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.
- Original Q23: verified as keyed. With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.
- Original Q24: verified as keyed. Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.
- Original Q25: verified as keyed. Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.
- Original Q26: verified as keyed. Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.
- Original Q27: verified as keyed. Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.
- Original Q28: verified as keyed. Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.
- Original Q29: verified as keyed. Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.
- Original Q30: verified as keyed. Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.
- Original Q31: verified as keyed. Slotting needs a slotter/shaper; key unchanged.