Nível 6


31 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.

Insira os valores:
Resultados:
%

Answers and sources

Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.

Question 1: answer and source

The bed of a machine tool is normally made of

Answer: C.I.

Cast iron's damping and castability make it the standard bed material; key unchanged.

Question 2: answer and source

For transmitting power between two shafts which are at right angles but non-intersecting, the gearing used is

Answer: worm and worm wheel

Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.

Question 3: answer and source

In a lifting machine, a load of 50 KN is moved through a distance of 0.1 m by an effort of 10 KN which moves through a distance of 1 m, the efficiency of the machine is

Answer: 50%

Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.

Question 4: answer and source

The spindles of bench vices are usually provided with

Answer: square threads

Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).

Source 1

Question 5: answer and source

Complementary shear stresses equal to 200 KN/m^2 are acting on the side of a square 1m*1m, the stress on the diagonal is

Answer: 200 KN/m^2, tensile

Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.

Question 6: answer and source

First law of thermodynamics involves the concept of

Answer: internal energy

The first law introduces internal energy (dU = dQ - dW); key unchanged.

Question 7: answer and source

The kinetic energy of a body of a mass 2kg, when it falls in air from rest through a height of 5 m is

Answer: 98.1 J

KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.

Question 8: answer and source

Indicated thermal efficiency of an engine is

Answer: Brake thermal efficiency/Mechanical efficiency

Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.

Question 9: answer and source

The approximate air fuel ratio in a diesel engine under rated conditions is

Answer: 20 to 1

Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.

Question 10: answer and source

A 4 cylinder 4 stroke diesel engine has 3000 power strokes per minute; its speed in RPM is

Answer: 1500

Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.

Question 11: answer and source

One of the following type of pumps is used in a diesel engine

Answer: reciprocating pump

The fuel injection pump is a reciprocating (plunger) pump; key unchanged.

Question 12: answer and source

In a six cylinder 4 stroke petrol engine running at 2000 RPM, the cam shaft runs at

Answer: 2000 RPM

The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.

Question 13: answer and source

The inlet valve in a 4 stroke IC engine opens

Answer: before TDC

Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.

Question 14: answer and source

The gudgeon pin connects the

Answer: piston and the connecting rod

The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.

Question 15: answer and source

The cost of lubricating oils in a machine shop may be classified as

Answer: factory overhead cost

Lubricants are indirect materials, part of factory overhead; key unchanged.

Question 16: answer and source

The thermo dynamic cycle used in a petrol engine is the

Answer: constant volume cycle

Petrol engines work on the Otto (constant volume) cycle; key unchanged.

Question 17: answer and source

A 4 stroke 2 cylinder diesel engine has an IMEP of 4 bar and a mechanical efficiency of 80 per cent, the brake mean effective pressure is

Answer: 3.2 bar

BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.

Question 18: answer and source

In an impulse turbine the velocity of steam remains constant in the

Answer: moving blades

In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.

Question 19: answer and source

Parson's turbine is an example of a

Answer: reaction turbine

Parsons' turbine is the classic reaction steam turbine; key unchanged.

Question 20: answer and source

An example of a water tube boiler is a

Answer: Babcock-Wilcox boiler

Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.

Question 21: answer and source

Which one of the following is a boiler mounting?

Answer: fusible plug

The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.

Question 22: answer and source

In our state a super thermal power station is located at

Answer: Ramagundam

Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.

Question 23: answer and source

Super heated steam at 20 bar enters a nozzle, for maximum discharge the throat pressure should be

Answer: 10.92 bar

With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.

Question 24: answer and source

For the purpose of comparison, the steam generating capacity of a boiler is generally expressed in terms of

Answer: equivalent evaporation

Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.

Question 25: answer and source

One of the following methods is adopted for governing of steam turbines in a power plant

Answer: throttle governing

Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.

Question 26: answer and source

An aircraft gas turbine operates on

Answer: Brayton cycle

Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.

Question 27: answer and source

The output of a gas turbine is 3000 KW and its efficiency is 20 percent, the heat supplied is

Answer: 15 MW

Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.

Question 28: answer and source

Which one of the following is not used as a refrigerant?

Answer: carbon monoxide

Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.

Question 29: answer and source

The refrigerant used in the domestic refrigerator is

Answer: Freon

Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.

Question 30: answer and source

In industry of developed nations the type of production most often occuring is

Answer: Batch production

Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.

Question 31: answer and source

The operation which can not be performed on a lathe machine is

Answer: slotting

Slotting needs a slotter/shaper; key unchanged.

Change log: 17 November 2026

Original question numbers and review decisions
  • Original Q1: verified as keyed. Cast iron's damping and castability make it the standard bed material; key unchanged.
  • Original Q2: verified as keyed. Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.
  • Original Q3: corrected. Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.
  • Original Q4: verified as keyed. Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).
  • Original Q5: verified as keyed. Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.
  • Original Q6: verified as keyed. The first law introduces internal energy (dU = dQ - dW); key unchanged.
  • Original Q7: verified as keyed. KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.
  • Original Q8: verified as keyed. Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.
  • Original Q9: verified as keyed. Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.
  • Original Q10: verified as keyed. Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.
  • Original Q11: verified as keyed. The fuel injection pump is a reciprocating (plunger) pump; key unchanged.
  • Original Q12: verified as keyed. The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.
  • Original Q13: verified as keyed. Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.
  • Original Q14: verified as keyed. The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.
  • Original Q15: verified as keyed. Lubricants are indirect materials, part of factory overhead; key unchanged.
  • Original Q16: verified as keyed. Petrol engines work on the Otto (constant volume) cycle; key unchanged.
  • Original Q17: verified as keyed. BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.
  • Original Q18: verified as keyed. In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.
  • Original Q19: verified as keyed. Parsons' turbine is the classic reaction steam turbine; key unchanged.
  • Original Q20: verified as keyed. Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.
  • Original Q21: verified as keyed. The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.
  • Original Q22: verified as keyed. Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.
  • Original Q23: verified as keyed. With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.
  • Original Q24: verified as keyed. Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.
  • Original Q25: verified as keyed. Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.
  • Original Q26: verified as keyed. Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.
  • Original Q27: verified as keyed. Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.
  • Original Q28: verified as keyed. Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.
  • Original Q29: verified as keyed. Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.
  • Original Q30: verified as keyed. Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.
  • Original Q31: verified as keyed. Slotting needs a slotter/shaper; key unchanged.