Stufe 6


31 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.

Geben Sie Ihre Werte ein:
Ergebnisse:
%

Answers and sources

Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.

Question 1: answer and source

The bed of a machine tool is normally made of

Answer: C.I.

Cast iron's damping and castability make it the standard bed material; key unchanged.

Question 2: answer and source

For transmitting power between two shafts which are at right angles but non-intersecting, the gearing used is

Answer: worm and worm wheel

Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.

Question 3: answer and source

In a lifting machine, a load of 50 KN is moved through a distance of 0.1 m by an effort of 10 KN which moves through a distance of 1 m, the efficiency of the machine is

Answer: 50%

Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.

Question 4: answer and source

The spindles of bench vices are usually provided with

Answer: square threads

Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).

Source 1

Question 5: answer and source

Complementary shear stresses equal to 200 KN/m^2 are acting on the side of a square 1m*1m, the stress on the diagonal is

Answer: 200 KN/m^2, tensile

Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.

Question 6: answer and source

First law of thermodynamics involves the concept of

Answer: internal energy

The first law introduces internal energy (dU = dQ - dW); key unchanged.

Question 7: answer and source

The kinetic energy of a body of a mass 2kg, when it falls in air from rest through a height of 5 m is

Answer: 98.1 J

KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.

Question 8: answer and source

Indicated thermal efficiency of an engine is

Answer: Brake thermal efficiency/Mechanical efficiency

Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.

Question 9: answer and source

The approximate air fuel ratio in a diesel engine under rated conditions is

Answer: 20 to 1

Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.

Question 10: answer and source

A 4 cylinder 4 stroke diesel engine has 3000 power strokes per minute; its speed in RPM is

Answer: 1500

Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.

Question 11: answer and source

One of the following type of pumps is used in a diesel engine

Answer: reciprocating pump

The fuel injection pump is a reciprocating (plunger) pump; key unchanged.

Question 12: answer and source

In a six cylinder 4 stroke petrol engine running at 2000 RPM, the cam shaft runs at

Answer: 2000 RPM

The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.

Question 13: answer and source

The inlet valve in a 4 stroke IC engine opens

Answer: before TDC

Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.

Question 14: answer and source

The gudgeon pin connects the

Answer: piston and the connecting rod

The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.

Question 15: answer and source

The cost of lubricating oils in a machine shop may be classified as

Answer: factory overhead cost

Lubricants are indirect materials, part of factory overhead; key unchanged.

Question 16: answer and source

The thermo dynamic cycle used in a petrol engine is the

Answer: constant volume cycle

Petrol engines work on the Otto (constant volume) cycle; key unchanged.

Question 17: answer and source

A 4 stroke 2 cylinder diesel engine has an IMEP of 4 bar and a mechanical efficiency of 80 per cent, the brake mean effective pressure is

Answer: 3.2 bar

BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.

Question 18: answer and source

In an impulse turbine the velocity of steam remains constant in the

Answer: moving blades

In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.

Question 19: answer and source

Parson's turbine is an example of a

Answer: reaction turbine

Parsons' turbine is the classic reaction steam turbine; key unchanged.

Question 20: answer and source

An example of a water tube boiler is a

Answer: Babcock-Wilcox boiler

Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.

Question 21: answer and source

Which one of the following is a boiler mounting?

Answer: fusible plug

The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.

Question 22: answer and source

In our state a super thermal power station is located at

Answer: Ramagundam

Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.

Question 23: answer and source

Super heated steam at 20 bar enters a nozzle, for maximum discharge the throat pressure should be

Answer: 10.92 bar

With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.

Question 24: answer and source

For the purpose of comparison, the steam generating capacity of a boiler is generally expressed in terms of

Answer: equivalent evaporation

Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.

Question 25: answer and source

One of the following methods is adopted for governing of steam turbines in a power plant

Answer: throttle governing

Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.

Question 26: answer and source

An aircraft gas turbine operates on

Answer: Brayton cycle

Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.

Question 27: answer and source

The output of a gas turbine is 3000 KW and its efficiency is 20 percent, the heat supplied is

Answer: 15 MW

Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.

Question 28: answer and source

Which one of the following is not used as a refrigerant?

Answer: carbon monoxide

Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.

Question 29: answer and source

The refrigerant used in the domestic refrigerator is

Answer: Freon

Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.

Question 30: answer and source

In industry of developed nations the type of production most often occuring is

Answer: Batch production

Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.

Question 31: answer and source

The operation which can not be performed on a lathe machine is

Answer: slotting

Slotting needs a slotter/shaper; key unchanged.

Change log: 17 November 2026

Original question numbers and review decisions
  • Original Q1: verified as keyed. Cast iron's damping and castability make it the standard bed material; key unchanged.
  • Original Q2: verified as keyed. Non-intersecting perpendicular shafts need worm gearing (bevel gears are for intersecting shafts); legacy keyed bevel gearing. Fixed misprint 'beve;'.
  • Original Q3: corrected. Efficiency = (50 x 0.1)/(10 x 1) = 50%; key unchanged. Legacy stem had lost the load distance ('moved by a distance of 10 KN'); repaired.
  • Original Q4: verified as keyed. Bench vice spindles use square threads (high efficiency power screw); legacy keyed acme (used on lead screws).
  • Original Q5: verified as keyed. Pure shear gives principal stresses equal to the shear stress (200 kN/m^2) in tension and compression on the diagonal planes; key unchanged.
  • Original Q6: verified as keyed. The first law introduces internal energy (dU = dQ - dW); key unchanged.
  • Original Q7: verified as keyed. KE = mgh = 2 x 9.81 x 5 = 98.1 J; key unchanged.
  • Original Q8: verified as keyed. Indicated thermal efficiency x mechanical efficiency = brake thermal efficiency; key unchanged.
  • Original Q9: verified as keyed. Diesel engines run lean at about 18-22:1; key unchanged. Fixed misprint '15 to 11'.
  • Original Q10: verified as keyed. Power strokes/min = (N/2) x cylinders = 2N, so N = 1500 RPM; legacy keyed 6000.
  • Original Q11: verified as keyed. The fuel injection pump is a reciprocating (plunger) pump; key unchanged.
  • Original Q12: verified as keyed. The camshaft runs at half crankshaft speed: 1000 RPM; key unchanged.
  • Original Q13: verified as keyed. Inlet valve opens before TDC (valve lead) to fill the cylinder well; key unchanged.
  • Original Q14: verified as keyed. The gudgeon (piston) pin joins the piston to the connecting rod small end; key unchanged. Fixed misprint 'gudgeion'.
  • Original Q15: verified as keyed. Lubricants are indirect materials, part of factory overhead; key unchanged.
  • Original Q16: verified as keyed. Petrol engines work on the Otto (constant volume) cycle; key unchanged.
  • Original Q17: verified as keyed. BMEP = mechanical efficiency x IMEP = 0.8 x 4 = 3.2 bar; key unchanged. Fixed misprint 'deisel'.
  • Original Q18: verified as keyed. In a pure impulse stage velocity is (ideally) constant over the moving blades; key unchanged. Fixed misprint 'inpulse'.
  • Original Q19: verified as keyed. Parsons' turbine is the classic reaction steam turbine; key unchanged.
  • Original Q20: verified as keyed. Babcock & Wilcox is a water tube boiler; the others are fire tube; key unchanged.
  • Original Q21: verified as keyed. The fusible plug is a safety mounting; superheater, economiser and chimney are accessories; key unchanged.
  • Original Q22: verified as keyed. Ramagundam (NTPC) is the super thermal power station of the then Andhra Pradesh region; key unchanged.
  • Original Q23: verified as keyed. With n = 1.3, critical ratio 0.5457: p_throat = 20 x 0.5457 = 10.92 bar; key unchanged.
  • Original Q24: verified as keyed. Equivalent evaporation (from and at 100 deg C) normalizes boiler capacity; key unchanged.
  • Original Q25: verified as keyed. Power-plant steam turbines use throttle (or nozzle) governing; key unchanged. Fixed misprint 'throtle'.
  • Original Q26: verified as keyed. Gas turbines work on the Brayton (Joule) cycle; key unchanged. Fixed misprints 'Sterling'/'Bryton'.
  • Original Q27: verified as keyed. Heat supplied = 3000/0.20 = 15,000 kW = 15 MW; key unchanged.
  • Original Q28: verified as keyed. Ammonia, SO2 and CO2 are all real refrigerants; carbon monoxide is not; key unchanged.
  • Original Q29: verified as keyed. Domestic refrigerators used Freon-12 at the time of writing (modern units use R-134a or R-600a); key unchanged.
  • Original Q30: verified as keyed. Batch production is the most common arrangement; key unchanged. Fixed misprints 'occuring'/'Create lot'.
  • Original Q31: verified as keyed. Slotting needs a slotter/shaper; key unchanged.