レベル 5
15 reviewed questions. Choose answers, then Calculate. Clear resets all selections. Unanswered questions score zero and remain in the percentage denominator. Open the answer review below for sources.
Answers and sources
Reviewed 17 November 2026. Ambiguous, malformed and unverified legacy questions have been removed. Wording and answer choices have been corrected where needed. This is a study quiz, not certification of engineering or laboratory decisions.
Question 1: answer and source
Manganin is an alloy of
Answer: Copper, manganese and nickel
Manganin is a copper-manganese-nickel alloy. The inspected source lists a typical composition of 84.2% Cu, 12.1% Mn and 3.7% Ni.
Question 2: answer and source
A nixie tube
Answer: is a display device
Nixie tube: cold-cathode glow-discharge numeral display device.
Question 3: answer and source
LED is
Answer: A PN junction which emits light when current passes in the forward direction
LED: a PN junction that emits light under forward bias.
Question 4: answer and source
What is the principle of working of thermocouple vacuum guage ?
Answer: Variation of thermal conductivity of gases with pressure
Thermocouple (Pirani-type) vacuum gauges measure pressure via the variation of gas thermal conductivity with pressure.
Question 5: answer and source
An accelerometer has a seismic mass of 0.05kg and a spring constant of 3 x 10^3 N/m. Maximum mass displacement of 0.02m before the mass hits the stop. The maximum measurable acceleration will be equal to
Answer: 1200 m / s^2
Working: a_max = k.x_max/m = (3 x 10^3 N/m x 0.02 m)/0.05 kg = 60/0.05 = 1200 m/s^2.
Question 6: answer and source
The transducers that convert the input physical phenomenon into an electrical output in the form of pulses are called
Answer: Digital Tranducers
Transducers whose electrical output is in the form of pulses/codes are digital transducers.
Question 7: answer and source
If the carrier of a 100 percent modulated AM transmitter is suppressed, the percentage power saving will be
Answer: 66.6
Working: at m = 1 the carrier fraction of total power = P_c/[P_c(1 + m^2/2)] = 1/1.5 = 66.6%; suppressing the carrier saves 66.6%.
Question 8: answer and source
A decade counter needs
Answer: 4 Flip-Flops
Working: mod-10 counter needs n with 2^n >= 10: 2^3 = 8 < 10, 2^4 = 16 >= 10, so 4 flip-flops.
Question 9: answer and source
For different loads the range of the values for VSWR is
Answer: 1 to Infinity
SWR = 1:1 for a matched load and infinite for total reflection; it can never be below 1. Legacy key '0.5 to 1' wrong.
Question 10: answer and source
The duty cycle of a pulse of width 2 micro sec and repetition frequency 4 KHz is
Answer: 0.008
Working: T = 1/4 kHz = 250 us; duty cycle = tau/T = 2/250 = 0.008.
Question 11: answer and source
Under force-voltage analogy, velocity is analogous to which of the following ?
Answer: Current
Impedance (force-voltage) analogy: force <-> voltage, velocity <-> current, mass <-> inductance.
Question 12: answer and source
In force-current analogy, capacitance is analogous to which of the following ?
Answer: Mass
Mobility (force-current) analogy: force <-> current, velocity <-> voltage, mass <-> capacitance.
Question 13: answer and source
The Laplace transform of e^-2t is given by
Answer: 1 / (s + 2)
Working: L{e^(-2t)} = integral of e^(-2t).e^(-st) dt = 1/(s+2).
Question 14: answer and source
Routh table was constructed from the characteristic equation of a control system. The first column of the table contained the following integers, 1,4,5,6,13. The system is
Answer: Stable
Working: first column 1, 4, 5, 6, 13 - all positive, zero sign changes, so no right-half-plane poles: stable. Legacy key 'None of these' wrong.
Question 15: answer and source
In a RC-coupled amplifier for improving the low frequency response
Answer: Higher Cc is used
Low-frequency response of an RC-coupled amplifier is set by the coupling capacitor's reactance 1/(omega Cc); a larger Cc lowers the low cutoff.
Change log: 17 November 2026
Original question numbers and review decisions
- Original Q1: verified. Manganin is a copper-manganese-nickel alloy. The inspected source lists a typical composition of 84.2% Cu, 12.1% Mn and 3.7% Ni.
- Original Q2: dropped. The Ryall crest-voltmeter paper was inaccessible (403), so the named instrument was not independently checked.
- Original Q3: dropped. The manufacturer history was inaccessible (403); no inspected source verifies the named Helipot row.
- Original Q4: dropped. Excluded from release because available support was insufficient.
- Original Q5: verified. Nixie tube: cold-cathode glow-discharge numeral display device.
- Original Q6: verified. LED: a PN junction that emits light under forward bias.
- Original Q7: dropped. The exact voltmeter resolution convention lacks inspected source support; do not infer range/display conventions.
- Original Q8: verified. Thermocouple (Pirani-type) vacuum gauges measure pressure via the variation of gas thermal conductivity with pressure.
- Original Q9: verified. Working: a_max = k.x_max/m = (3 x 10^3 N/m x 0.02 m)/0.05 kg = 60/0.05 = 1200 m/s^2.
- Original Q10: dropped. Recovered stem (span 4000-10000 deg) makes the true answer 7.5 deg, which is absent from the options; the keyed 0.75 deg only fits a guessed original span of 400-1000 deg. Guessing a corrupted original is not permitted, so dropped per revision rule.
- Original Q11: verified. Transducers whose electrical output is in the form of pulses/codes are digital transducers.
- Original Q12: dropped. Image frequency depends on high-side or low-side oscillator injection; this is not stated.
- Original Q13: verified. Working: at m = 1 the carrier fraction of total power = P_c/[P_c(1 + m^2/2)] = 1/1.5 = 66.6%; suppressing the carrier saves 66.6%.
- Original Q14: verified. Working: mod-10 counter needs n with 2^n >= 10: 2^3 = 8 < 10, 2^4 = 16 >= 10, so 4 flip-flops.
- Original Q15: corrected. SWR = 1:1 for a matched load and infinite for total reflection; it can never be below 1. Legacy key '0.5 to 1' wrong.
- Original Q16: verified. Working: T = 1/4 kHz = 250 us; duty cycle = tau/T = 2/250 = 0.008.
- Original Q17: dropped. The revised 90-ohm option does not report the specified uncertainty and loses the claimed tenths-place precision.
- Original Q18: dropped. Two options state flat response; the combined option is not a unique factual answer.
- Original Q19: verified. Impedance (force-voltage) analogy: force <-> voltage, velocity <-> current, mass <-> inductance.
- Original Q20: verified. Mobility (force-current) analogy: force <-> current, velocity <-> voltage, mass <-> capacitance.
- Original Q21: corrected. Made all transform denominators explicit with parentheses; integral from 0 to infinity gives 1/(s+2).
- Original Q22: dropped. The cited lesson returned navigation without the needed explanation; this none-of-these formulation remains insufficiently sourced.
- Original Q23: dropped. The accessible source does not establish the universal special-case claim; the cited lecture could not be retrieved.
- Original Q24: dropped. Question is incomplete: it refers to 'the system' without giving its transfer function or specs, so the 25% overshoot key cannot be verified or derived.
- Original Q25: dropped. As written, P(s) = (1/s) + 1 has a pole at the origin, so the DC gain is infinite; none of the options (1/2/5/10) is correct and the intended function cannot be reconstructed without guessing.
- Original Q26: dropped. Routh/Hurwitz can also test shifted-axis relative stability, so the revised exclusive key is not justified.
- Original Q27: corrected. Working: first column 1, 4, 5, 6, 13 - all positive, zero sign changes, so no right-half-plane poles: stable. Legacy key 'None of these' wrong.
- Original Q28: dropped. The system type is missing from the recovered stem ('A type system...'); the keyed answer only fits a guessed 'type-1'. Guessing a corrupted original is not permitted, so dropped per revision rule.
- Original Q29: dropped. The definition omits zero initial conditions and system assumptions stated in the explanation.
- Original Q30: dropped. The categorical exclusion of Laplace analysis for discrete-time systems is broader than the Z-transform source supports.
- Original Q31: verified. Low-frequency response of an RC-coupled amplifier is set by the coupling capacitor's reactance 1/(omega Cc); a larger Cc lowers the low cutoff.